http://www.squid-cache.org/Versions/v2/2.6/

./configure --enable-ssl

groupadd squid
useradd -g squid squid

mkdir /usr/local/squid/cache
mkdir /usr/local/squid/logs
chown -R squid.squid /usr/local/squid/cache
chown -R squid.squid /usr/local/squid/logs

rm /usr/local/squid/etc/squid.conf
pico /usr/local/squid/etc/squid.conf

#CONFIG
# TAG: http_port
# Usage: port
# hostname:port
# 1.2.3.4:port
#
# The socket addresses where Squid will listen for HTTP client
# requests. You may specify multiple socket addresses.
# There are three forms: port alone, hostname with port, and
# IP address with port. If you specify a hostname or IP
# address, then Squid binds the socket to that specific
# address. This replaces the old ‘tcp_incoming_address’
# option. Líklegt, you do not need to bind to a specific
# address, so you can use the port number alone.
#
# The default port number is 3128.
#
# If you are running Squid in accelerator mode, then you
# probably want to listen on port 80 Líka, or instead.
#
# The -a command line option will override the *first* port
# number listed here. That option will NOT override an IP
# address, samt sem áður.
#
# You may specify multiple socket addresses on multiple lines.
#
#Default:

http_port 8887
forwarded_for off

# TAG: icp_port
# The port number where Squid sends and receives ICP queries to
# and from neighbor caches. Default is 3130. To disable use
# “0″. May be overridden with -u on the command line.
#
#Default:
icp_port 3130

# TAG: hierarchy_stoplist
# A list of words which, if found in a URL, cause the object to
# be handled directly by this cache. In other words, use this
# to not query neighbor caches for certain objects. You may
# list this option multiple times.
#
#We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?

# TAG: no_cache
# A list of ACL elements which, if matched, cause the reply to
# immediately removed from the cache. In other words, use this
# to force certain objects to never be cached.
#
# You must use the word ‘DENY’ to indicate the ACL names which should
# NOT be cached.
#
#We recommend you to use the following two lines.
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY

# OPTIONS WHICH AFFECT THE CACHE SIZE
#—————————————————————————–

# TAG: cache_mem (bytes)
# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
#
# ‘cache_mem’ specifies the ideal amount of memory to be used
# for:
# * In-Transit objects
# * Hot Objects
# * Negative-Cached objects
#
# Data for these objects are stored in 4 KB blocks. This
# parameter specifies the ideal upper limit on the total size of
# 4 KB blocks allocated. In-Transit objects take the highest
# priority.
#
# In-transit objects have priority over the others. When
# additional space is needed for incoming data, negative-cached
# and hot objects will be released. In other words, Hinn
# negative-cached and hot objects will fill up any unused space
# not needed for in-transit objects.
#
# If circumstances require, this limit will be exceeded.
# Specifically, if your incoming request rate requires more than
# ‘cache_mem’ of memory to hold in-transit objects, Squid will
# exceed this limit to satisfy the new requests. When the load
# decreases, blocks will be freed until the high-water mark is
# reached. Thereafter, blocks will be used to store hot
# objects.
#
#Default:
cache_mem 32 MB

# TAG: cache_swap_low (percent, 0-100)
# TAG: cache_swap_high (percent, 0-100)
#
# The low- and high-water marks for cache object replacement.
# Replacement begins when the swap (disk) usage is above the
# low-water mark and attempts to maintain utilization near the
# low-water mark. As swap utilization gets close to high-water
# mark object eviction becomes more aggressive. If utilization is
# close to the low-water mark less replacement is done each time.
#
# Defaults are 90% and 95%. If you have a large cache, 5% could be
# hundreds of MB. If this is the case you may wish to set these
# numbers closer together.
#
#Default:
cache_swap_low 90
cache_swap_high 95

# TAG: maximum_object_size (bytes)
# Objects larger than this size will NOT be saved on disk. Hinn
# value is specified in kilobytes, and the default is 4MB. If
# you wisho get a high BYTES hit ratio, you should probably
# increase this (one 32 MB object hit counts for 3200 10KB
# hits). If you wish to increase speed more than your want to
# save bandwidth you should leave this low.
#
# NOTE: if using the LFUDA replacement policy you should increase
# this value to maximize the byte hit rate improvement of LFUDA!
# See replacement_policy below for a discussion of this policy.
#
#Default:
maximum_object_size 4096 KB

# TAG: maximum_object_size_in_memory (bytes)
# Objects greater than this size will not be attempted to kept in
# the memory cache. This should be set high enough to keep objects
# accessed frequently in memory to improve performance whilst low
# enough to keep larger objects from hoarding cache_mem .
#
#Default:
maximum_object_size_in_memory 8 KB

# LOGFILE PATHNAMES AND CACHE DIRECTORIES
#—————————————————————————–

# TAG: cache_dir
# Usage:
#
# cache_dir Type Directory-Name Fs-specific-data [options]
#
# You can specify multiple cache_dir lines to spread the
# cache among different disk partitions.
#
# Type specifies the kind of storage system to use. Most
# everyone will want to use “ufs” as the type. If you are using
# Async I/O (–enable async-io) on Linux or Solaris, then you may
# want to try “aufs” as the type. Async IO support may be
# buggy, samt sem áður, so beware.
#
# ‘Directory’ is a top-level directory where cache swap
# files will be stored. If you want to use an entire disk
# for caching, then this can be the mount-point directory.
# The directory must exist and be writable by the Squid
# process. Squid will NOT create this directory for you.
#
# The ufs store type:
#
# “ufs” is the old well-known Squid storage format that has always
# been there.
#
# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
#
# ‘Mbytes’ is the amount of disk space (MB) to use under this
# directory. The default is 100 MB. Change this to suit your
# configuration.
#
# ‘Level-1′ is the number of first-level subdirectories which
# will be created under the ‘Directory’. The default is 16.
#
# ‘Level-2′ is the number of second-level subdirectories which
# will be created under each first-level directory. The default
# is 256.
#
# The aufs store type:
#
# “aufs” uses the same storage format as “ufs”, utilizing
# POSIX-threads to avoid blocking the main Squid process on
# disk-I/O. This was formerly known in Squid as async-io.
#
# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
#
# see argument descriptions under ufs above
#
# The diskd store type:
#
# “diskd” uses the same storage format as “ufs”, utilizing a
# separate process to avoid blocking the main Squid process on
# disk-I/O.
#
# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
#
# see argument descriptions under ufs above
#
# Q1 specifies the number of unacknowledged I/O requests when Squid
# stops opening new files. If this many messages are in the queues,
# Squid won’t open new files. Default is 64
#
# Q2 specifies the number of unacknowledged messages when Squid
# starts blocking. If this many messages are in the queues,
# Squid blocks until it recevies some replies. Default is 72
#
# Common options:
#
# read-only, this cache_dir is read only.
#
# max-size=n, refers to the max object size this storedir supports.
# It is used to initially choose the storedir to dump the object.
# Note: To make optimal use of the max-size limits you should order
# the cache_dir lines with the smallest max-size value first and the
# ones with no max-size specification last.
#
#Default:
cache_dir ufs /usr/local/squid/cache 100 16 256

# TAG: cache_access_log
# Logs the client request activity. Contains an entry for
# every HTTP and ICP queries received.
#
#Default:
cache_access_log /usr/local/squid/logs/access.log

# TAG: cache_log
# Cache logging file. This is where general information about
# your cache’s behavior goes. You can increase the amount of data
# logged to this file with the “debug_options” tag below.
#
#Default:
cache_log /usr/local/squid/logs/cache.log

# TAG: cache_store_log
# Logs the activities of the storage manager. Shows which
# objects are ejected from the cache, and which objects are
# saved and for how long. To disable, enter “none”. There are
# not really utilities to analyze this data, so you can safely
# disable it.
#
#Default:
cache_store_log /usr/local/squid/logs/store.log

# TAG: pid_filename
# A filename to write the process-id to. To disable, enter “none”.
#
#Default:
pid_filename /usr/local/squid/logs/squid.pid

# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
#—————————————————————————–

# TAG: ftp_user
# If you want the anonymous login password to be more informative
# (and enable the use of picky ftp servers), set this to something
# reasonable for your domain, like wwwuser@somewhere.net
#
# The reason why this is domainless by default is that the
# request can be made on the behalf of a user in any domain,
# depending on how the cache is used.
# Some ftp server also validate that the email address is valid
# (for example perl.com).
#
#Default:
# ftp_user Squid@

#Examples:
#acl myexample dst_as 1241
#acl password proxy_auth REQUIRED
#acl fileupload req_mime_type -i ^multipart/form-data$
#
#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl thai src 58.0.0.0/8 61.0.0.0/8 202.0.0.0/8 203.0.0.0/8 124.0.0.0/8
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT

#Default:
#http_access deny all
#
#Recommended minimum configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost thai
http_access deny manager
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# And finally deny all other access to this proxy
#http_access allow all

# TAG: icp_access
# Allowing or Denyqng access to the ICP port based on defined
# access lists
#
# icp_access allow|deny [!]aclname …
#
# See http_access for details
#
#Default:
# icp_access deny all
#
#Allow ICP queries from eveyone
icp_access allow all

# TAG: cache_effective_user
# TAG: cache_effective_group
#
# If the cache is run as root, it will change its effective/real
# UID/GID to the UID/GID specified below. The default is to
# change to UID to nobody and GID to nogroup.
#
# If Squid is not started as root, the default is to keep the
# current UID/GID. Note that if Squid is not started as root then
# you cannot set http_port to a value lower than 1024.
#
#Default:
cache_effective_user squid
cache_effective_group squid

### END ###

/usr/local/squid/sbin/squid -z
/usr/local/squid/sbin/squid -N -d 1 -D